Izdelki za cevi za (4208)

Beanspruchung: Druck- und Zugbeanspruchung in axialer Richtung. GMD-1 Zur Aufnahme von Stoß- und Beschleunigungskräften. Aufbau: Elastischer Gummikörper mit Hohlprofil und Sicherheitsriegel. Einseitig anvulkanisierter Gewindebolzen. U-Metallprofil mit Durchgangsbohrungen zur Deckenbefestigung.

T-Verbinder 2227 - Rohrverbinder: Ø 60 mm / 2"

GRUNDOMAT GRUNDORAM GRUNDOPIT GRUNDODRILL GRUNDOBORE Software Maxi HDD rigs Pipe and cable plows

TUBO DI RAME PREISOLATO GREEN EN 12735-1 IGQ, RIVESTIMENTO IN PE-X ESPANSO EUROCLASSE B S2 D0, CON BARRIERA ANTI-UV DI ALLUMINIO. CUPEX GEL SILVER è un tubo di rame isolato da una guaina in Polietilene espanso Reticolato accoppiata esternamente a una foglia di alluminio anti-UV. CUPEX GEL SILVER ha un valore di resistenza alla diffusione del vapore acqueo molto più alto delle altre tubazioni presenti nel mercato! Lega:Cu-DHP (Cu: 99.90% min., P: 0.015÷0.040%) Residuo carbonioso:<0,05 mg/dm² Garanzia:30 anni contro la corrosione Esterno:LD-PE e foglia di alluminio anti-UV Temperatura di utilizzo:-80° +120° C Resistenza alla diffusione del vapore d’acqua:µ > 50'000 (EN 13469) UTILIZZO SPECIFICO:• Impianti di climatizzazione • Split • Pompe di calore

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

ESPIRAL PA12 15x12x1,5 MM Material:PA12 Diâmetro:15x12 Cor:Laranja/Azul

Superior Tube supplies a whole range of products to the oil and gas sector, and it’s one of our most important markets. You’ll find our high performance tubes successfully used in some of the most aggressive subsea and downhole conditions thanks to our proven track record in meeting the strict quality requirements of the oil, gas and geothermal energy industries. Improving technology has extended the range of ways in which oil and gas fields can be exploited, and increasingly projects require the use of long, continuous lengths of stainless steel control lines. These are employed in a variety of applications including hydraulic controls, instrumentation, chemical injection, umbilicals and flowline control. Fine Tubes supplies products for all of these applications, and more, lowering operating costs and improved recovery methods for our customers. Please note that we have a minimum order value of £10,000.

Ming Xiao Mfg engaged in metal parts custom machining services more than 20 years,we can produce tube accessories from stainless steel,aluminum, copper & brass, generally we buy standard tube or pipe to produce the parts, However, since the size of the foreign customer is in inches, we need to customize the pipe to process the finished products. have been customed many kinds of metal parts for different industries.We providing relavent processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc. Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc. CRS (cold rolling steel) sheet, HRS (hot rolling steel) sheet,hot-galvanize steel sheet (SGCC,SPCC,). stainless steel: 201,304,316... Aluminum alloy: 1060,2024, 3003,5052,6061,etc All standard brass and copper If you are interested in our tube processing services, please contact us for consultation!

Perfil de 40x40x1 mm – 35x35x1.5 mm, galvanizado Código:PG-DAP Dimensiones:40 cm Peso:3.5 kg

We manufacture a wide range of vessel heads to works standards, both for construction purposes and as dished vessel heads in the form of torispherical heads, elliptical heads and caps for pressure applications. Applications are very varied – ranging from candleholders to pipe end-pieces or pressure vessels in equipment construction. And if a central hole is needed for connections, this can also be provided.

Precision strip used in the manufacture of spiral wound gaskets and other processes such as pressings. Our Bobbin wound material is extensively used in the gasket sealing industry. Bobbins can be up to 15kgs and speed up the change overs and reduce scrap loss. Our spiral wound gasket production facilitates thicknesses of 0.20mm, 0.18mm, 015mm and 0.10mm. Widths come as standard in 5.33mm, 5.0mm, 4,75mm with a minimum width of 2.50mm. The minimum order for our bobbin wound products is 20k depending on the grade ordered. All of our spiral wound gaskets can be supplied on plastic ribbon or pancake coils. Our inner ring production sizes come in 3.00mm, 4.00mm and 5.00mm thicknesses and widths of 6.50mm wide to 100mm wide. Our minimum orders for inner ring production is 50kg depending on the grade. Material can be supplied as coil or in lengths of a maximum 3 metre.

Sicher - Schnell - Einfach, das sind die herausragenden Eigenschaften des KURO PEHD Erdrohrprogramms. Die einzige, absolut wasserdichte Rohrpost-Erdleitung, die kein Fahrrohr benötigt, da die Büchsen direkt in den Sonderabmessungen fahren. Abmessung::NW 90 / NW 110 / NW 160 Grad::15°/ 30°/ 45°/ 90° Radius (NW 90/110)::1000 Radius (NW 160)::1200 Ausführung::im Wellmantel mit vorfabrizierter Verbandisolierung Material::Polyethylen hoher Dichte Farbe::königsblau Sonderanfertigung::auf Anfrage

AWH produce componenti di alta qualità in acciaio inossidabile per l’industria alimentare e delle bevande e offre giunti per tubi conformi a praticamente tutte le norme di tubi consuete di questo settore. Inoltre Italgomma2 offre, oltre al suo ampio programma di componenti di processo, anche le tubazioni.

LWCand Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced by horizantal casting after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380 weight:50-150kg

Iron collectors

achberg pipe systems - bends (stainless steel hardened)

EN 10241 STANDARDI 1/4" 'den 6" ' e kadar tüm ebatlarda imalatımız mevcut.

Swivels

Übergang / Reduzierung rund-rund konisch. Fertig verschweißt, mit und ohne Flansch Oberfl äche III C (gebeizt) • Abmessungen ausgelegt für eine Isolierstärke von 100 mm (gilt nicht für gezogene Bögen) • Fertigungstoleranz ± 3 mm

Our fittings has been designed by our own European Engineers team. We designed an innovative a profile which avoids the risk of damaging the O-rings when the pipe is pushed on to the fitting. Our fittings high quality is based on: – Patented design brass fitting, with three EPDM O-rings and inox sleeves. – Triple safety with three O-rings in the designed fitting. – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3. – Compatible with multilayer pipes. – Compatible with several jaw profiles U, H, TH, RFz – Lead free brass available on request.

Suitable for air-conditioning, refrigeration systems. Cu-Dhp 99.9% copper pipe insulated with an expanded polyethylene tube, closed cell and external LDPE foil. Maximum fire safety with self-extinguishing DIN 401-B1, SBI BL S1D0. Non toxic gases and resistant to external chemical agents and ultraviolet rays.

L'insert isolant électrique NEMS - produit tubulaire monobloc à protéger la canalisation contre corrosion électrochimique en zones affectées par courants parasites. Installé - aux limites des tronçons de protection électrochimique de canalisations - aux limites des parcelles - aux limites des tronçons de canalisation avec différents types et qualités de revêtements de protection/changements en résistance électrique spécifique du sol - pour la séparation électrique des sections hors sol de canalisations de longueur de plus 1000 m des sections souterraines - méthode pour identifier les sections de canalisation affectées par courants parasites, la résistance inductive du PT -dans des raffineries de gaz et de pétrole intégrées, des stations de compression ou des dépôts pétroliers Avantages -Résistent à de lourdes charges mécaniques -La durée de vie correspond à la durée de vie du gazoduc -Installé sur tous types de gazoducs -Température de fonctionnement +150 C et plus Diamètre :0,9 à 21 pouces Épaisseur de paroi de tuyau en acier:0,12 à 0,99 pouces Température de l'environnement de travail:jusqu'à 150 ° C Pression de service:392 bar Résistance électrique:Pas moins de 5 mΩ Force électrique:Pas plus de 50 mA Caractéristiques climatiques:à base d'amorces alkyde; à base de compositions thermodurcissables; tuyau doublé de polyéthylène Revêtement interne:résistance aux intempéries; revêtement thermorétractable; revêtement thermodurcissable

Reduction

Zugfeste Rohverbindung für Metall - Metall Rohrverbindung aus A4 (1.4571) Edelstahl von 21 mm bis 750 mm Rohrdurchmesser bis PN 25 Zolltarif Nr.:: 7307298010 / 7307298090

Best applicable for use in hygienic or aseptic pipes and containers or tanks even with very small immersion lengths. It meets increased protection requirements of the temperature sensor regarding physical and chemical effects. Ideally suited to all measuring points that require regular recalibration by simply replacing the insert in closed processes. Measuring Principle:Fabricated Thermowell Characteristic / Application:metric style; hygienic/aseptic design (3-A®, EHEDG, ASME BPE, FDA); hygienic process connections; Qu Head connection:QuickNeck; male thread:; M24x1,5; G3/8" Maximum standard immersion length:4.000 mm (157,48") Process connection:compression fitting; weld in adaptor; clamp connections acc. to ISO2852; screwed pipe joint acc. to Thermowell root diameter:6,0 mm (0,24"); 9,0 mm (0,35"); 12,7 mm (0,5") Medium contact material:1.4435 delta-ferrit < 1%; 316L Wetted part finishing (Ra):< 0,76 μm (29,92 µin); < 0,38 μm (14,96 µin); < 0,38 μm (14,96 µin) electropolished Tip shape:straight; reduced; tappered Temperature range:-200...650 °C (-328...1.202 °F)

Plusieurs éléments de tuyauterie divers chapeaux chinois chapeaux à ciel ouvert terminal grillagé coudes terminaux clapets de compensation de charge (soupapes) capteurs divers sur mesure Matière utilisée, au choix Acier galvanisé Acier inoxydable Acier électrozingué + peinture EPOXY au RAL de votre choix Marque:Aspir'elec

Edelstahlrohr geschw. 33.7 x 2mm 1.4301 240 Korn geschliffen von 100-3000mm Edelstahlrundrohr V2A 33,7x2,0mm Korn 240 geschliffen 1.4301 EN10058/EN 10088 in verschiedenen Längen. Bitte wählen Sie Ihre gewünschte Länge. Bei uns zahlen Sie nur 1 x Versandkosten also bitte erst alle Längen kaufen und dann bezahlen. Kategorie: Handlaufrohre Artikelnummer: 103266 Länge: 100 - 3000 mm

Copper and brass tube assembly parts.

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

1) Die am häufigsten verwendete Geometrie für Edelstahl ist das Blech. 2) Dicke: 0,5-50 mm, Breite: 1000-2000 mm, Länge: 2000-6000 mm. 3) Verwendete Werkstoffe: Chrom-Nickel-Stähle, z.B. 1.4301 (AISI 304), 1.4401 (AISI 316). 4) Nutzung: Edelstahl wird in der Lebensmittelindustrie, Medizintechnik, Bauwesen und Chemieindustrie eingesetzt. Basierend auf den Kundenanforderungen bieten wir verschiedene Abmessungen und Oberflächenqualitäten an, um spezifische technische und ästhetische Bedürfnisse zu erfüllen.